{"title":"Chassis Systems","description":"","products":[{"product_id":"72-chevy-fleetside-bagged-chassis-upgrade-for-amt-kit","title":"’72 Chevy Fleetside Bagged Chassis Upgrade for AMT Kit","description":"\u003cp\u003eGive the AMT 1972 Chevrolet Fleetside a fully detailed air-ride foundation with this bagged chassis upgrade from 193D\/Nineteen3D. The multi-piece resin conversion includes more than 50 parts for a complete custom chassis, three suspension heights, air-management details, driveline components, exhaust, fuel and electrical accessories, cooling parts, and engine-bay structure.\u003c\/p\u003e\u003ch3\u003eProduct Highlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMore than 50 individual chassis and suspension components\u003c\/li\u003e\n\u003cli\u003eComplete bagged suspension and air-ride system details\u003c\/li\u003e\n\u003cli\u003eThree suspension-height configurations\u003c\/li\u003e\n\u003cli\u003eDifferential and driveshaft components\u003c\/li\u003e\n\u003cli\u003eExhaust system\u003c\/li\u003e\n\u003cli\u003eBatteries, fuel tank, and radiator\u003c\/li\u003e\n\u003cli\u003eEngine-bay details and full chassis base\u003c\/li\u003e\n\u003cli\u003eLow configuration can achieve approximately 4 mm ground clearance when used with 19-inch scale wheels, according to the source description\u003c\/li\u003e\n\u003cli\u003eDesigned to support a frame-laying stance with proper preparation and setup\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatibility and Fitment\u003c\/h3\u003e\u003cp\u003eDesigned specifically as a chassis upgrade for the AMT 1\/24 or 1\/25 scale 1972 Chevrolet Fleetside donor kit. The donor kit is required and is not included. Installation requires modification of the cab and bed. The front edge of the interior bucket must be trimmed, the bed must be cut or removed for full drop, and the front inner fenders may require trimming or removal depending on wheel size. Final fitment depends on ride-height selection, wheel and tire dimensions, body preparation, and careful chassis alignment.\u003c\/p\u003e\u003ch3\u003eWhat’s Included\u003c\/h3\u003e\u003cp\u003eOne unassembled resin bagged chassis conversion containing the full chassis base, suspension and air-ride components, three ride-height configurations, differential and driveshaft parts, exhaust, batteries, fuel tank, radiator, engine-bay details, and the supplied chassis components.\u003c\/p\u003e\u003ch3\u003eScale\u003c\/h3\u003e\u003cp\u003eDesigned for 1\/24 and 1\/25 scale builds.\u003c\/p\u003e\u003ch3\u003eBuilder Notes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe AMT 1972 Chevrolet Fleetside donor kit is required and is not included.\u003c\/li\u003e\n\u003cli\u003eAssembly instructions are not included; reference images from the artist may be used to assist assembly.\u003c\/li\u003e\n\u003cli\u003eSignificant cutting, trimming, fabrication, test-fitting, and alignment are required.\u003c\/li\u003e\n\u003cli\u003eSupplied unassembled and unpainted unless otherwise stated.\u003c\/li\u003e\n\u003cli\u003eClean resin parts before priming and painting.\u003c\/li\u003e\n\u003cli\u003eHobby tools, adhesives, paint, wheels, tires, donor kit, and other accessories are not included unless expressly stated.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eStandard MMW Disclaimer\u003c\/h3\u003e\u003cp\u003eProduct photos may show assembled, painted, or detailed examples for display purposes. Only the components specifically described above are included. Paint, adhesives, decals, donor kits, and other accessories are not included unless expressly stated.\u003c\/p\u003e","brand":"193D(Nineteen 3D)","offers":[{"title":"Default Title","offer_id":51291221786924,"sku":"MMW-AMT72-CHASSIS-193D","price":50.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/1232\/0812\/files\/1.png?v=1782278313"},{"product_id":"revell-1966-chevy-fleetside-slammed-bagged-chassis","title":"1966 Chevrolet Bagged Chassis Kit – Revell Fleetside Chevy","description":"\u003cp\u003eTransform the Revell 1\/25 scale 1966 Chevrolet Fleetside into a full custom show truck with this bagged chassis conversion from GoldenB3D. Inspired by modern Roadster Shop-style builds, the 36-piece system is designed to create a true frame-laying stance with detailed suspension, braking, and air-management components.\u003c\/p\u003e\u003ch3\u003eProduct Highlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e36-piece custom chassis conversion\u003c\/li\u003e\n\u003cli\u003eTwo-piece custom frame\u003c\/li\u003e\n\u003cli\u003eFront and rear airbag suspension\u003c\/li\u003e\n\u003cli\u003eAir tank and twin compressors\u003c\/li\u003e\n\u003cli\u003eFront and rear shocks\u003c\/li\u003e\n\u003cli\u003eA-arms, tie rods, and spindles\u003c\/li\u003e\n\u003cli\u003eRear axle with trailing links\u003c\/li\u003e\n\u003cli\u003eBrake rotors and calipers\u003c\/li\u003e\n\u003cli\u003eFuel cell\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatibility and Fitment\u003c\/h3\u003e\u003cp\u003eDesigned specifically for the Revell 1\/25 scale 1966 Chevrolet Fleetside model kit. The donor kit is required and is not included. To achieve the intended frame-laying stance, the kit bed must be removed, and the front inner fenders may require trimming or removal depending on wheel size and final setup.\u003c\/p\u003e\u003ch3\u003eWhat’s Included\u003c\/h3\u003e\u003cp\u003eOne unassembled 36-piece resin bagged chassis conversion with the frame, suspension, air-management components, brakes, rear axle, and fuel cell described above.\u003c\/p\u003e\u003ch3\u003eScale\u003c\/h3\u003e\u003cp\u003e1\/25 scale.\u003c\/p\u003e\u003ch3\u003eBuilder Notes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSupplied unassembled and unpainted unless otherwise stated.\u003c\/li\u003e\n\u003cli\u003eThis conversion is best suited to experienced builders.\u003c\/li\u003e\n\u003cli\u003eSanding, trimming, test-fitting, and minor cleanup may be required.\u003c\/li\u003e\n\u003cli\u003eClean resin parts before priming and painting.\u003c\/li\u003e\n\u003cli\u003eHobby tools, adhesives, paint, wheels, tires, donor kit, and accessories are not included unless expressly stated.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eStandard MMW Disclaimer\u003c\/h3\u003e\u003cp\u003eProduct photos may show assembled, painted, or detailed examples for display purposes. Only the components specifically described above are included. Paint, adhesives, decals, donor kits, and other accessories are not included unless expressly stated.\u003c\/p\u003e","brand":"GoldenB3D","offers":[{"title":"Default Title","offer_id":51300482318636,"sku":"G3D-66CHEV-FRAME-SLAMMED","price":40.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/1232\/0812\/files\/516755077_1423505258685066_754192251887488726_n.jpg?v=1782283204"},{"product_id":"revell-foose-ford-f100-bagged-chassis","title":"Bagged Chassis Kit for Revell Chip Foose FD100 (1956 Ford F100)","description":"\u003cp\u003eTransform the Revell Chip Foose FD100 1956 Ford F100 into a fully detailed, ground-hugging custom with this complete bagged chassis conversion from GoldenB3D. Designed specifically for the 1\/25 scale donor kit, this 50-plus-piece resin system replaces the stock underpinnings with a modern air-ride chassis, detailed suspension, fuel system, and custom wheel-and-tire package.\u003c\/p\u003e\u003ch3\u003eProduct Highlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eComplete slammed chassis conversion\u003c\/li\u003e\n\u003cli\u003eMore than 50 detailed resin components\u003c\/li\u003e\n\u003cli\u003eFull air-ride suspension and control-system detailing\u003c\/li\u003e\n\u003cli\u003eCustom Gunni wheels and tires included\u003c\/li\u003e\n\u003cli\u003eDesigned specifically for the Revell Chip Foose FD100 1956 Ford F100\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatibility and Fitment\u003c\/h3\u003e\u003cp\u003eDesigned for the Revell 1\/25 scale Chip Foose FD100 1956 Ford F100 donor kit. The donor body, cab, interior, engine, glass, trim, and other kit components are required. Cutting, trimming, test-fitting, and adjustment of the donor kit may be necessary to install the conversion correctly.\u003c\/p\u003e\u003ch3\u003eWhat’s Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCustom frame\u003c\/li\u003e\n\u003cli\u003eFuel cell\u003c\/li\u003e\n\u003cli\u003eAir tanks\u003c\/li\u003e\n\u003cli\u003eCompressor\u003c\/li\u003e\n\u003cli\u003eController\u003c\/li\u003e\n\u003cli\u003eFront A-arms\u003c\/li\u003e\n\u003cli\u003eShocks\u003c\/li\u003e\n\u003cli\u003eRear axle\u003c\/li\u003e\n\u003cli\u003eRear suspension links\u003c\/li\u003e\n\u003cli\u003eSpindles\u003c\/li\u003e\n\u003cli\u003eAdditional chassis and suspension components\u003c\/li\u003e\n\u003cli\u003eGunni wheels and tires\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eScale\u003c\/h3\u003e\u003cp\u003e1\/25 scale.\u003c\/p\u003e\u003ch3\u003eBuilder Notes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThis is a resin conversion kit and requires the Revell donor model.\u003c\/li\u003e\n\u003cli\u003eSupplied unassembled and unpainted unless otherwise stated.\u003c\/li\u003e\n\u003cli\u003eSanding, trimming, drilling, test-fitting, minor cleanup, and donor-kit modification may be required.\u003c\/li\u003e\n\u003cli\u003eClean resin parts before priming and painting.\u003c\/li\u003e\n\u003cli\u003eHobby tools, adhesives, paint, donor kit, engine, wiring, plumbing, and other accessories are not included unless expressly stated.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eStandard MMW Disclaimer\u003c\/h3\u003e\u003cp\u003eProduct photos may show assembled, painted, or detailed examples for display purposes. Only the components specifically described above are included. Paint, adhesives, decals, donor kits, and other accessories are not included unless expressly stated.\u003c\/p\u003e","brand":"GoldenB3D","offers":[{"title":"Default Title","offer_id":51300482941228,"sku":"GB3D-FD100-SLAMMED","price":35.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/1232\/0812\/files\/515349165_1236651351269345_7251999343586575340_n.jpg?v=1782283569"},{"product_id":"moebius-69-ford-f100-long-frame-bagged-chassis","title":"Moebius '69 Ford F100 Short Bed Bagged Chassis","description":"\u003cp\u003eGive the Moebius 1969 Ford F100 Short Bed an aggressive show-truck stance with this detailed bagged chassis from GoldenB3D. Designed specifically for the 1\/25 scale Moebius kit, the frame combines a slammed layout with the major suspension and chassis components needed for a custom air-ride or low static build.\u003c\/p\u003e\u003ch3\u003eProduct Highlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eComplete slammed chassis designed for the Moebius 1969 Ford F100 Short Bed\u003c\/li\u003e\n\u003cli\u003eLow show-truck stance\u003c\/li\u003e\n\u003cli\u003eFoose-inspired custom frame layout\u003c\/li\u003e\n\u003cli\u003eMajor suspension and frame-detail components included\u003c\/li\u003e\n\u003cli\u003eSuitable for air-ride or static-drop builds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatibility and Fitment\u003c\/h3\u003e\u003cp\u003eDesigned specifically for the Moebius 1\/25 scale 1969 Ford F100 Short Bed donor kit. The donor kit is required and is not included. Final fitment depends on careful alignment of the cab, bed, suspension, drivetrain, wheels, and interior components.\u003c\/p\u003e\u003ch3\u003eWhat’s Included\u003c\/h3\u003e\u003cp\u003eOne unassembled resin bagged and slammed chassis conversion set with the supplied frame, suspension, and chassis-detail components.\u003c\/p\u003e\u003ch3\u003eScale\u003c\/h3\u003e\u003cp\u003e1\/25 scale.\u003c\/p\u003e\u003ch3\u003eBuilder Notes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSupplied unassembled and unpainted unless otherwise stated.\u003c\/li\u003e\n\u003cli\u003eSanding, trimming, drilling, test-fitting, and minor cleanup may be required.\u003c\/li\u003e\n\u003cli\u003eClean resin parts before priming and painting.\u003c\/li\u003e\n\u003cli\u003eHobby tools, adhesives, paint, donor kit, drivetrain, wheels, tires, and other accessories are not included unless expressly stated.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eStandard MMW Disclaimer\u003c\/h3\u003e\u003cp\u003eProduct photos may show assembled, painted, or detailed examples for display purposes. Only the components specifically described above are included. Paint, adhesives, decals, donor kits, and other accessories are not included unless expressly stated.\u003c\/p\u003e","brand":"GoldenB3D","offers":[{"title":"Default Title","offer_id":51300486938924,"sku":"GB3D-F100-69SLAM","price":35.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/1232\/0812\/files\/515071980_1923251135162420_7716083252415253649_n.jpg?v=1782283908"},{"product_id":"dual-compressor-air-ride-system-w-stand","title":"Dual Compressor Air Ride System w\/ Stand","description":"\u003cp\u003eAdd a complete show-quality air-ride display to a bagged truck, VIP build, custom car, or detailed diorama with the Dual Compressor Air Ride System with Stand from 193D. The set includes the major trunk- or bed-mounted components needed to create a convincing custom air-suspension installation.\u003c\/p\u003e\u003ch3\u003eProduct Highlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTwo detailed air compressors\u003c\/li\u003e\n\u003cli\u003eTwo Optima-style batteries\u003c\/li\u003e\n\u003cli\u003eAir-ride control module\u003c\/li\u003e\n\u003cli\u003eLarge air tank with detailed fittings\u003c\/li\u003e\n\u003cli\u003eCustom display stand for organized trunk or bed installation\u003c\/li\u003e\n\u003cli\u003eCan be used with or without the supplied stand\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatibility and Fitment\u003c\/h3\u003e\u003cp\u003eDesigned for custom use in 1\/24 and 1\/25 scale builds. Final fitment depends on the trunk, pickup bed, cargo area, chassis, and desired display layout. Test-fit all components before final assembly and adapt the stand or mounting surfaces as required.\u003c\/p\u003e\u003ch3\u003eWhat’s Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTwo resin compressors\u003c\/li\u003e\n\u003cli\u003eTwo resin Optima-style batteries\u003c\/li\u003e\n\u003cli\u003eOne resin air-ride control module\u003c\/li\u003e\n\u003cli\u003eOne large resin air tank with detailed fittings\u003c\/li\u003e\n\u003cli\u003eOne custom resin display stand\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eScale\u003c\/h3\u003e\u003cp\u003eDesigned for 1\/24 and 1\/25 scale builds.\u003c\/p\u003e\u003ch3\u003eBuilder Notes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eWiring and plumbing line are not included.\u003c\/li\u003e\n\u003cli\u003eSupplied unassembled and unpainted unless otherwise stated.\u003c\/li\u003e\n\u003cli\u003eSanding, trimming, drilling, test-fitting, and minor cleanup may be required.\u003c\/li\u003e\n\u003cli\u003eClean resin parts before priming and painting.\u003c\/li\u003e\n\u003cli\u003eHobby tools, adhesives, paint, fittings, wire, hose, donor kits, and other accessories are not included unless expressly stated.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eStandard MMW Disclaimer\u003c\/h3\u003e\u003cp\u003eProduct photos may show assembled, painted, or detailed examples for display purposes. Only the components specifically described above are included. Paint, adhesives, decals, donor kits, and other accessories are not included unless expressly stated.\u003c\/p\u003e","brand":"193D(Nineteen 3D)","offers":[{"title":"Default Title","offer_id":51599958999340,"sku":"N19D-AIRRIDE-DC","price":7.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/1232\/0812\/files\/520583430_769551958751759_2585934536556656050_n.jpg?v=1782289670"},{"product_id":"universal-regular-extended-cab-short-bed-bagged-chassis","title":"Universal Regular\/Extended Cab Short Bed Bagged Chassis","description":"\u003cp\u003eCreate a frame-laying short-bed pickup with the Universal Regular\/Extended Cab Bagged Chassis from Northwind Customs. Designed for compatible Revell, AMT, MPC, and similar kits, the resin package combines air suspension, steering, brakes, rear axle components, and chassis-length options for regular- and extended-cab builds.\u003c\/p\u003e\u003ch3\u003eProduct Highlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eComplete bagged chassis system\u003c\/li\u003e\n\u003cli\u003eRear Shockwave-style air bags\u003c\/li\u003e\n\u003cli\u003eAir tank and compressor\u003c\/li\u003e\n\u003cli\u003eFront and rear brakes\u003c\/li\u003e\n\u003cli\u003eSteering components and rear axle assembly\u003c\/li\u003e\n\u003cli\u003eRear control arms\u003c\/li\u003e\n\u003cli\u003eRegular- and extended-cab options\u003c\/li\u003e\n\u003cli\u003eExtension piece for longer configurations\u003c\/li\u003e\n\u003cli\u003eOptional front-suspension section\u003c\/li\u003e\n\u003cli\u003eSegmented frame option for easier assembly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eOptions Available\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRegular Cab\u003c\/li\u003e\n\u003cli\u003eExtended Cab\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatibility and Fitment\u003c\/h3\u003e\u003cp\u003eDesigned for compatible 1\/25 scale short-bed pickup kits from Revell, AMT, MPC, and similar manufacturers. The chassis is configured around a frame-laying stance with approximately 23-inch wheels and may be adapted for 19-inch wheels with modification. Final fitment depends on the exact donor body, cab and bed length, wheelbase, floor, wheel package, and desired stance.\u003c\/p\u003e\u003ch3\u003eWhat’s Included\u003c\/h3\u003e\u003cp\u003eOne unassembled resin bagged chassis system in the selected cab configuration with frame components, front and rear suspension parts, rear air bags, air tank, compressor, brakes, steering components, rear axle, rear control arms, extension and optional front-suspension components as supplied.\u003c\/p\u003e\u003ch3\u003eScale\u003c\/h3\u003e\u003cp\u003e1\/25 scale.\u003c\/p\u003e\u003ch3\u003eBuilder Notes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEach purchase includes only the selected cab configuration.\u003c\/li\u003e\n\u003cli\u003eWheels, tires, body, and interior are not included.\u003c\/li\u003e\n\u003cli\u003eSupplied unassembled and unpainted unless otherwise stated.\u003c\/li\u003e\n\u003cli\u003eSanding, trimming, drilling, pinning, test-fitting, fabrication, and minor cleanup may be required.\u003c\/li\u003e\n\u003cli\u003eClean resin parts before priming and painting.\u003c\/li\u003e\n\u003cli\u003eHobby tools, adhesives, paint, donor kit, drivetrain, and other accessories are not included unless expressly stated.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eStandard MMW Disclaimer\u003c\/h3\u003e\u003cp\u003eProduct photos may show assembled, painted, or detailed examples for display purposes. Only the components specifically described above are included. Paint, adhesives, decals, donor kits, and other accessories are not included unless expressly stated.\u003c\/p\u003e","brand":"Northwind Customs","offers":[{"title":"Regular Cab","offer_id":51997696753964,"sku":"NW-BAG-CHASSIS-125-RC","price":35.0,"currency_code":"CAD","in_stock":true},{"title":"Extended Cab","offer_id":51997696786732,"sku":"NW-BAG-CHASSIS-125-EC","price":35.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/1232\/0812\/files\/Untitleddesign_5.png?v=1782292514"},{"product_id":"pro-touring-tube-frame-adjustable","title":"Pro Touring Tube Frame – Adjustable","description":"\u003cp\u003eAdd a modern Pro Touring tube-frame front end to a muscle car, restomod, or custom project with this Adjustable Tube Frame from Nineteen3D. Multiple length settings, adjustable strut towers, steering-side choices, and dedicated engine supports make the assembly adaptable to a wide range of builds.\u003c\/p\u003e\u003ch3\u003eProduct Highlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePro Touring-inspired tube-frame front end\u003c\/li\u003e\n\u003cli\u003eRight- or left-hand-drive options\u003c\/li\u003e\n\u003cli\u003eAdjustable strut towers\u003c\/li\u003e\n\u003cli\u003eThree length configurations\u003c\/li\u003e\n\u003cli\u003eBlank engine support included\u003c\/li\u003e\n\u003cli\u003eDedicated supports for Slowlys Models LS3 and Motabas Yen Viper V10 engines\u003c\/li\u003e\n\u003cli\u003eLongest configuration can accommodate a Viper V10 setup\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eOptions Available\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRight Hand Drive\u003c\/li\u003e\n\u003cli\u003eLeft Hand Drive\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatibility and Fitment\u003c\/h3\u003e\u003cp\u003eDesigned for custom installation in 1\/24 and 1\/25 scale builds. Final fitment depends on the selected steering side and frame length, donor body and floor dimensions, engine choice, gearbox position, suspension, and hood clearance. The Viper V10 installation requires the corresponding headers and oil pan plus a higher-mounted gearbox position.\u003c\/p\u003e\u003ch3\u003eWhat’s Included\u003c\/h3\u003e\u003cp\u003eOne unassembled resin adjustable tube-frame front-end set in the selected steering configuration, with adjustable strut towers, three length options, blank engine support, and the supplied LS3 and Viper V10 support components.\u003c\/p\u003e\u003ch3\u003eScale\u003c\/h3\u003e\u003cp\u003eDesigned for 1\/24 and 1\/25 scale builds.\u003c\/p\u003e\u003ch3\u003eBuilder Notes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEach purchase includes only the selected steering-side option.\u003c\/li\u003e\n\u003cli\u003eEngines are not included.\u003c\/li\u003e\n\u003cli\u003eSupplied unassembled and unpainted unless otherwise stated.\u003c\/li\u003e\n\u003cli\u003eSanding, trimming, drilling, test-fitting, fabrication, and minor cleanup may be required.\u003c\/li\u003e\n\u003cli\u003eClean resin parts before priming and painting.\u003c\/li\u003e\n\u003cli\u003eHobby tools, adhesives, paint, donor kits, engines, suspension parts, and other accessories are not included unless expressly stated.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eStandard MMW Disclaimer\u003c\/h3\u003e\u003cp\u003eProduct photos may show assembled, painted, or detailed examples for display purposes. Only the components specifically described above are included. Paint, adhesives, decals, donor kits, and other accessories are not included unless expressly stated.\u003c\/p\u003e","brand":"193D(Nineteen 3D)","offers":[{"title":"Right Hand Drive","offer_id":51998318199084,"sku":"N19-PROTOUR-FRAME-RHD","price":25.0,"currency_code":"CAD","in_stock":true},{"title":"Left Hand Drive","offer_id":51998318231852,"sku":"N19-PROTOUR-FRAME-LHD","price":25.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/1232\/0812\/files\/550740406_793888593030626_4603662941812321827_n.jpg?v=1782293812"},{"product_id":"watts-link-truck-chassis-rear-end","title":"Watts Link Truck Chassis Rear End","description":"\u003cp\u003eAdd realistic rear-suspension engineering to a Pro Touring car, mini-truck, street machine, or custom chassis with the Watts Link Truck Chassis Rear End from Nineteen3D. This detailed multi-piece resin assembly combines the axle, differential, Watts-link geometry, control arms, mounting hardware, and a choice of coilover- or airbag-style setup components.\u003c\/p\u003e\u003ch3\u003eProduct Highlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eComplete Watts-link rear-suspension system\u003c\/li\u003e\n\u003cli\u003eDetailed axle housing and differential\u003c\/li\u003e\n\u003cli\u003eWatts-link arms and central pivot system\u003c\/li\u003e\n\u003cli\u003eCoilover- and airbag-style setup components with brackets\u003c\/li\u003e\n\u003cli\u003eUpper and lower control arms\u003c\/li\u003e\n\u003cli\u003eMounting links and supports\u003c\/li\u003e\n\u003cli\u003eMulti-piece design for easier painting and assembly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatibility and Fitment\u003c\/h3\u003e\u003cp\u003eDesigned for custom integration into many 1\/24 and 1\/25 scale truck and car chassis. This is not a guaranteed direct-fit replacement for every kit. Final fitment depends on frame width, axle width, mounting points, wheel and tire clearance, ride height, suspension geometry, and the selected spring or airbag configuration.\u003c\/p\u003e\u003ch3\u003eWhat’s Included\u003c\/h3\u003e\u003cp\u003eOne unassembled resin Watts-link rear-end system with axle housing, differential, Watts-link arms and pivot components, coilover- and airbag-style components with brackets, upper and lower control arms, mounting links, supports, and the supplied suspension parts.\u003c\/p\u003e\u003ch3\u003eScale\u003c\/h3\u003e\u003cp\u003eDesigned for 1\/24 and 1\/25 scale builds.\u003c\/p\u003e\u003ch3\u003eBuilder Notes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCustom mounting, fabrication, and adjustment may be required.\u003c\/li\u003e\n\u003cli\u003eSupplied unassembled and unpainted unless otherwise stated.\u003c\/li\u003e\n\u003cli\u003eSanding, trimming, drilling, test-fitting, and minor cleanup may be required.\u003c\/li\u003e\n\u003cli\u003eClean resin parts before priming and painting.\u003c\/li\u003e\n\u003cli\u003eHobby tools, adhesives, paint, wheels, tires, chassis, donor kits, and other accessories are not included unless expressly stated.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eStandard MMW Disclaimer\u003c\/h3\u003e\u003cp\u003eProduct photos may show assembled, painted, or detailed examples for display purposes. Only the components specifically described above are included. Paint, adhesives, decals, donor kits, and other accessories are not included unless expressly stated.\u003c\/p\u003e","brand":"193D(Nineteen 3D)","offers":[{"title":"Default Title","offer_id":51998327734572,"sku":"N19-WATTS-REAR","price":20.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/1232\/0812\/files\/551314765_1929731657813550_8890478814134638478_n.jpg?v=1782294033"},{"product_id":"1972-chevy-fleetside-cheyenne-bagged-chassis","title":"1972 Chevy Fleetside “Cheyenne” Bagged Chassis","description":"\u003cp\u003eGive the AMT 1\/25 scale 1972 Chevrolet C10 Fleetside a fully slammed custom foundation with this bagged chassis conversion from GoldenB3D. Modeled around the AMT kit dimensions and modern custom-chassis references, this system is designed for lowrider, mini-truck, and show-truck builds.\u003c\/p\u003e\u003ch3\u003eProduct Highlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eComplete bagged chassis conversion\u003c\/li\u003e\n\u003cli\u003eDesigned for a fully slammed stance\u003c\/li\u003e\n\u003cli\u003eModeled around accurate AMT kit dimensions\u003c\/li\u003e\n\u003cli\u003eSuitable for lowrider, mini-truck, and show builds\u003c\/li\u003e\n\u003cli\u003eAssembly manual included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatibility and Fitment\u003c\/h3\u003e\u003cp\u003eDesigned specifically for the AMT 1\/25 scale 1972 Chevrolet C10 Fleetside Pickup, model 6691. The donor kit is required and is not included. Test-fitting is required throughout assembly, particularly around the body, bed, drivetrain, suspension, and wheel placement.\u003c\/p\u003e\u003ch3\u003eWhat’s Included\u003c\/h3\u003e\u003cp\u003eOne unassembled resin bagged chassis conversion with the components shown in the product images and an assembly manual.\u003c\/p\u003e\u003ch3\u003eScale\u003c\/h3\u003e\u003cp\u003e1\/25 scale.\u003c\/p\u003e\u003ch3\u003eBuilder Notes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSupplied unassembled and unpainted unless otherwise stated.\u003c\/li\u003e\n\u003cli\u003eThis conversion is best suited to experienced builders.\u003c\/li\u003e\n\u003cli\u003eSanding, trimming, test-fitting, and minor cleanup may be required.\u003c\/li\u003e\n\u003cli\u003eClean resin parts before priming and painting.\u003c\/li\u003e\n\u003cli\u003eDonor kit, wheels, tires, engine, transmission, hobby tools, adhesives, paint, and accessories are not included unless expressly stated.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eStandard MMW Disclaimer\u003c\/h3\u003e\u003cp\u003eProduct photos may show assembled, painted, or detailed examples for display purposes. Only the components specifically described above are included. Paint, adhesives, decals, donor kits, and other accessories are not included unless expressly stated.\u003c\/p\u003e","brand":"GoldenB3D","offers":[{"title":"Default Title","offer_id":52105474834732,"sku":"3DVM-GB3D-72CHBAGCHAS","price":40.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/1232\/0812\/files\/Chassi-72-Chevy-Fleetside-v1005.webp?v=1782296276"},{"product_id":"1966-chevy-bagged-dually-hauler-chassis","title":"1966 Chevy Bagged Dually Hauler Chassis","description":"\u003cp\u003eCreate a fully slammed custom hauler with the 1966 Chevy Bagged Dually Hauler Chassis from GoldenB3D. Designed around the Revell 1\/25 scale 1966 Chevrolet donor kit, this complete super-dually conversion combines a stretched custom frame, dedicated suspension, air-management hardware, and dually-specific running gear.\u003c\/p\u003e\u003ch3\u003eProduct Highlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCustom super-dually chassis\u003c\/li\u003e\n\u003cli\u003eTotally slammed frame layout\u003c\/li\u003e\n\u003cli\u003eFront and rear suspension\u003c\/li\u003e\n\u003cli\u003eAir-lift system\u003c\/li\u003e\n\u003cli\u003eDually rear axle\u003c\/li\u003e\n\u003cli\u003eWheel set included\u003c\/li\u003e\n\u003cli\u003eAssembly manual included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatibility and Fitment\u003c\/h3\u003e\u003cp\u003eDesigned for the Revell 1\/25 scale 1966 Chevrolet model kit. The donor cab and interior are required and are not included. Test-fitting is required throughout assembly, especially around the cab, interior, drivetrain, and final wheel placement.\u003c\/p\u003e\u003ch3\u003eWhat’s Included\u003c\/h3\u003e\u003cp\u003eOne unassembled resin dually hauler chassis conversion with frame, wheels, front and rear suspension, air-lift components, dually axle, and assembly manual.\u003c\/p\u003e\u003ch3\u003eScale\u003c\/h3\u003e\u003cp\u003e1\/25 scale.\u003c\/p\u003e\u003ch3\u003eBuilder Notes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSupplied unassembled and unpainted unless otherwise stated.\u003c\/li\u003e\n\u003cli\u003eThis conversion is best suited to experienced builders.\u003c\/li\u003e\n\u003cli\u003eSanding, trimming, test-fitting, and minor cleanup may be required.\u003c\/li\u003e\n\u003cli\u003eClean resin parts before priming and painting.\u003c\/li\u003e\n\u003cli\u003eEngine, transmission, donor cab, donor interior, hobby tools, adhesives, paint, and accessories are not included unless expressly stated.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eStandard MMW Disclaimer\u003c\/h3\u003e\u003cp\u003eProduct photos may show assembled, painted, or detailed examples for display purposes. Only the components specifically described above are included. Paint, adhesives, decals, donor kits, and other accessories are not included unless expressly stated.\u003c\/p\u003e","brand":"GoldenB3D","offers":[{"title":"Default Title","offer_id":52105486139692,"sku":"3DVM-GB3D-66CHBAGDUALLY","price":50.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/1232\/0812\/files\/Chassi-66-Chevy-Fleetside-Super-Dually-2-v7437_53f4ab5b-7f4d-4942-95f7-558ed385130e.webp?v=1782296442"},{"product_id":"1969-ford-f100-dually-flat-deck-chassis","title":"1969 Ford F100 Dually Flat Deck Chassis","description":"\u003cp\u003eTurn the Moebius 1\/25 scale 1969 Ford F100 into a fully slammed custom hauler with this dually flat-deck chassis conversion from GoldenB3D. The long-frame layout combines a dedicated dually stance, custom suspension, air-management hardware, and a flat-deck bed for a complete show-truck foundation.\u003c\/p\u003e\u003ch3\u003eProduct Highlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLong-frame dually chassis\u003c\/li\u003e\n\u003cli\u003eTotally slammed custom stance\u003c\/li\u003e\n\u003cli\u003eFront and rear suspension\u003c\/li\u003e\n\u003cli\u003eAir-lift system\u003c\/li\u003e\n\u003cli\u003eWheel set included\u003c\/li\u003e\n\u003cli\u003eFlat-deck bed included\u003c\/li\u003e\n\u003cli\u003eAssembly manual included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatibility and Fitment\u003c\/h3\u003e\u003cp\u003eDesigned for the Moebius 1\/25 scale 1969 Ford F100 model kit. The donor cab is required and is not included. Test-fitting is required throughout assembly, especially around the cab, drivetrain, interior, and final wheel placement.\u003c\/p\u003e\u003ch3\u003eWhat’s Included\u003c\/h3\u003e\u003cp\u003eOne unassembled resin dually flat-deck chassis conversion with frame, wheels, front and rear suspension, air-lift components, flat-deck bed, and assembly manual.\u003c\/p\u003e\u003ch3\u003eScale\u003c\/h3\u003e\u003cp\u003e1\/25 scale.\u003c\/p\u003e\u003ch3\u003eBuilder Notes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSupplied unassembled and unpainted unless otherwise stated.\u003c\/li\u003e\n\u003cli\u003eThis conversion is best suited to experienced builders.\u003c\/li\u003e\n\u003cli\u003eSanding, trimming, test-fitting, and minor cleanup may be required.\u003c\/li\u003e\n\u003cli\u003eClean resin parts before priming and painting.\u003c\/li\u003e\n\u003cli\u003eEngine, transmission, donor cab, donor interior, hobby tools, adhesives, paint, and accessories are not included unless expressly stated.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eStandard MMW Disclaimer\u003c\/h3\u003e\u003cp\u003eProduct photos may show assembled, painted, or detailed examples for display purposes. Only the components specifically described above are included. Paint, adhesives, decals, donor kits, and other accessories are not included unless expressly stated.\u003c\/p\u003e","brand":"GoldenB3D","offers":[{"title":"Default Title","offer_id":52105490596140,"sku":null,"price":65.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/1232\/0812\/files\/Chassi6-Long-v3911.webp?v=1782296910"},{"product_id":"universal-bagged-front-suspension-kit","title":"Universal Bagged Front Suspension Kit","description":"\u003cp\u003eReplace or upgrade the front suspension in a bagged car, slammed truck, or custom chassis project with this Universal Bagged Front Suspension Kit. The detailed 14-part resin assembly combines steering, control arms, pivots, air bags, and brakes for flexible installation across a wide range of builds.\u003c\/p\u003e\u003ch3\u003eProduct Highlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eUniversal bagged front-suspension design\u003c\/li\u003e\n\u003cli\u003eCentral bar and steering-box components\u003c\/li\u003e\n\u003cli\u003eLeft and right pivots\u003c\/li\u003e\n\u003cli\u003eBrake discs and left\/right calipers\u003c\/li\u003e\n\u003cli\u003eAir bags\u003c\/li\u003e\n\u003cli\u003eUpper and lower control arms\u003c\/li\u003e\n\u003cli\u003eUpper-arm supports\u003c\/li\u003e\n\u003cli\u003eFourteen-part assembly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatibility and Fitment\u003c\/h3\u003e\u003cp\u003eDesigned for custom integration into many 1\/24 and 1\/25 scale model cars and trucks. This is not a guaranteed direct-fit replacement for every kit. Final fitment depends on frame width, track width, wheel and brake clearance, steering geometry, mounting points, and desired ride height.\u003c\/p\u003e\u003ch3\u003eWhat’s Included\u003c\/h3\u003e\u003cp\u003eOne unassembled resin 14-part front-suspension kit with central bar, steering box and arms, left and right pivots, duplicated brake discs, left and right calipers, duplicated air bags, left and right lower arms, duplicated upper arms, and left and right upper-arm supports.\u003c\/p\u003e\u003ch3\u003eScale\u003c\/h3\u003e\u003cp\u003eDesigned for 1\/24 and 1\/25 scale builds.\u003c\/p\u003e\u003ch3\u003eBuilder Notes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAssembly instructions are not included.\u003c\/li\u003e\n\u003cli\u003eCustom mounting and fabrication may be required.\u003c\/li\u003e\n\u003cli\u003eSupplied unassembled and unpainted unless otherwise stated.\u003c\/li\u003e\n\u003cli\u003eSanding, trimming, drilling, test-fitting, and minor cleanup may be required.\u003c\/li\u003e\n\u003cli\u003eClean resin parts before priming and painting.\u003c\/li\u003e\n\u003cli\u003eHobby tools, adhesives, paint, wheels, tires, chassis parts, donor kits, and other accessories are not included unless expressly stated.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eStandard MMW Disclaimer\u003c\/h3\u003e\u003cp\u003eProduct photos may show assembled, painted, or detailed examples for display purposes. Only the components specifically described above are included. Paint, adhesives, decals, donor kits, and other accessories are not included unless expressly stated.\u003c\/p\u003e","brand":"GoldenB3D","offers":[{"title":"Default Title","offer_id":52105495740716,"sku":"3DVM-GB3D-GBFSK","price":20.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/1232\/0812\/files\/front-susp5.webp?v=1782297160"},{"product_id":"pro-touring-chassis-kit-for-1957-chevrolet-bel-air","title":"Pro Touring Chassis Kit for 1957 Chevrolet Bel Air","description":"\u003cp\u003eTransform a 1957 Chevrolet Bel Air into a modern restomod, show car, or track-inspired Pro Touring build with this detailed chassis kit from MCS Designs. Engineered for compatible AMT\/ERTL, AMT re-tool, and Revell donor kits, the package combines a three-piece chassis, multiple front and rear clip configurations, complete suspension detail, brakes, exhaust, and a Ford 9-inch rear end.\u003c\/p\u003e\u003ch3\u003eProduct Highlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDesigned for compatible 1957 Chevrolet Bel Air kits\u003c\/li\u003e\n\u003cli\u003eComplete three-piece chassis\u003c\/li\u003e\n\u003cli\u003eHigh- and low-mount rear clip options for different AMT versions\u003c\/li\u003e\n\u003cli\u003eFront clip options with or without A-arms\u003c\/li\u003e\n\u003cli\u003eTwin exhaust system and steering rack\u003c\/li\u003e\n\u003cli\u003eFront sway bar and rear anti-roll bar\u003c\/li\u003e\n\u003cli\u003eFour brake discs and four calipers\u003c\/li\u003e\n\u003cli\u003eAdjustable front and rear coilovers\u003c\/li\u003e\n\u003cli\u003eRear control arms and sheet-metal differential housing\u003c\/li\u003e\n\u003cli\u003eFord 9-inch differential center\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatibility and Fitment\u003c\/h3\u003e\u003cp\u003eDesigned for compatible 1\/24 and 1\/25 scale AMT\/ERTL, AMT re-tool, and Revell 1957 Chevrolet Bel Air donor kits. The donor kit is required and is not included. Select and test-fit the appropriate front and rear clip configuration for the exact kit version before final assembly.\u003c\/p\u003e\u003ch3\u003eWhat’s Included\u003c\/h3\u003e\u003cp\u003eOne unassembled resin Pro Touring chassis kit with three-piece chassis, high- and low-mount rear clip options, front clip options with and without A-arms, twin exhaust, steering rack, sway and anti-roll bars, four brake discs, four calipers, front hubs, four adjustable coilovers, rear control arms, sheet-metal differential housing, brackets, and Ford 9-inch center section.\u003c\/p\u003e\u003ch3\u003eScale\u003c\/h3\u003e\u003cp\u003eDesigned for 1\/24 and 1\/25 scale builds.\u003c\/p\u003e\u003ch3\u003eBuilder Notes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAssembly instructions are not included; use the designer’s reference images for guidance.\u003c\/li\u003e\n\u003cli\u003eSupplied unassembled and unpainted unless otherwise stated.\u003c\/li\u003e\n\u003cli\u003eSanding, trimming, drilling, test-fitting, and minor cleanup may be required.\u003c\/li\u003e\n\u003cli\u003eClean resin parts before priming and painting.\u003c\/li\u003e\n\u003cli\u003eHobby tools, adhesives, paint, donor kit, drivetrain, wheels, tires, and other accessories are not included unless expressly stated.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eStandard MMW Disclaimer\u003c\/h3\u003e\u003cp\u003eProduct photos may show assembled, painted, or detailed examples for display purposes. Only the components specifically described above are included. Paint, adhesives, decals, donor kits, and other accessories are not included unless expressly stated.\u003c\/p\u003e","brand":"MCS Design","offers":[{"title":"Default Title","offer_id":52346371637548,"sku":"MCSD-57BELAIR-PROTOUR","price":40.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/1232\/0812\/files\/IMG_0460.jpg?v=1782300189"},{"product_id":"pro-street-tubbed-rear-chassis-clip","title":"Pro Street Tubbed Rear Chassis Clip","description":"\u003cp\u003eBuild a realistic tubbed rear structure for a pro-street, tuff-street, drag, or custom back-half project with the Pro Street Tubbed Rear Chassis Clip from MCS Design. This scratch-designed resin assembly combines bead-rolled sheet-metal styling with a braced Ford 9-inch rear end, four-link suspension, coilovers, brakes, and anti-roll hardware.\u003c\/p\u003e\u003ch3\u003eProduct Highlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePurpose-built tubbed rear chassis clip\u003c\/li\u003e\n\u003cli\u003eBead-rolled sheet-metal panel detail\u003c\/li\u003e\n\u003cli\u003eBraced Ford 9-inch differential housing and center section\u003c\/li\u003e\n\u003cli\u003eFour-link bars and upper locator bar\u003c\/li\u003e\n\u003cli\u003eTBM-style rear brakes\u003c\/li\u003e\n\u003cli\u003eDetailed one-piece coilovers\u003c\/li\u003e\n\u003cli\u003eAnti-roll bar with links\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatibility and Fitment\u003c\/h3\u003e\u003cp\u003eDesigned for custom integration into 1\/24 and 1\/25 scale model cars and trucks. This is not a direct-fit replacement for every donor kit. Final fitment depends on the donor floor, frame width, wheelbase, body width, tub dimensions, drivetrain, wheel and tire package, and desired ride height.\u003c\/p\u003e\u003ch3\u003eWhat’s Included\u003c\/h3\u003e\u003cp\u003eOne unassembled resin rear chassis conversion set with tubbed rear clip, bead-rolled panels, braced Ford 9-inch housing, center section, four-link bars, upper locator bar, TBM-style brakes, coilovers, anti-roll bar, and links.\u003c\/p\u003e\u003ch3\u003eScale\u003c\/h3\u003e\u003cp\u003eDesigned for 1\/24 and 1\/25 scale builds.\u003c\/p\u003e\u003ch3\u003eBuilder Notes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRecommended for intermediate to advanced builders.\u003c\/li\u003e\n\u003cli\u003eAssembly instructions are not included; use the designer’s reference images for guidance.\u003c\/li\u003e\n\u003cli\u003eSupplied unassembled and unpainted unless otherwise stated.\u003c\/li\u003e\n\u003cli\u003eSanding, trimming, drilling, test-fitting, fabrication, and minor cleanup may be required.\u003c\/li\u003e\n\u003cli\u003eClean resin parts before priming and painting.\u003c\/li\u003e\n\u003cli\u003eHobby tools, adhesives, paint, donor kits, wheels, tires, drivetrain components, and other accessories are not included unless expressly stated.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eStandard MMW Disclaimer\u003c\/h3\u003e\u003cp\u003eProduct photos may show assembled, painted, or detailed examples for display purposes. Only the components specifically described above are included. Paint, adhesives, decals, donor kits, and other accessories are not included unless expressly stated.\u003c\/p\u003e","brand":"MCS Design","offers":[{"title":"Default Title","offer_id":52384825180460,"sku":"MCSD-PSTUB","price":30.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/1232\/0812\/files\/IMG_6246.webp?v=1782302719"},{"product_id":"pro-touring-front-clip","title":"Pro Touring Front Clip","description":"\u003cp\u003eReplace a stock front frame section with a modern motorsport-inspired assembly using the Pro Touring Front Clip from MCS Design. This adjustable resin system is intended for drift, time-attack, GT, racing, and Pro Touring projects and includes low- and mid-ride-height configurations for stance and suspension tuning.\u003c\/p\u003e\u003ch3\u003eProduct Highlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBraced front clip with integrated tubs and supports\u003c\/li\u003e\n\u003cli\u003eLow- and mid-ride-height configurations\u003c\/li\u003e\n\u003cli\u003eOptional steering-rack mount\u003c\/li\u003e\n\u003cli\u003eTwo-piece steering rack\u003c\/li\u003e\n\u003cli\u003eLarge-diameter brake discs\u003c\/li\u003e\n\u003cli\u003eTen-piston racing-style brake calipers\u003c\/li\u003e\n\u003cli\u003eTilton-style brake reservoir\u003c\/li\u003e\n\u003cli\u003eFront hub, wishbone, and pushrod suspension components\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatibility and Fitment\u003c\/h3\u003e\u003cp\u003eDesigned for custom integration into 1\/24 and 1\/25 scale model cars. This is not a universal direct-fit part. Final fitment depends on frame width, wheelbase, body clearance, engine placement, steering layout, suspension geometry, and selected ride height.\u003c\/p\u003e\u003ch3\u003eWhat’s Included\u003c\/h3\u003e\u003cp\u003eOne unassembled resin Pro Touring front clip set with low- and mid-height clip components, steering-rack mount, two-piece steering rack, brake discs, racing calipers, brake reservoir, front hubs, wishbones, and pushrod suspension parts.\u003c\/p\u003e\u003ch3\u003eScale\u003c\/h3\u003e\u003cp\u003eDesigned for 1\/24 and 1\/25 scale builds.\u003c\/p\u003e\u003ch3\u003eBuilder Notes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRecommended for intermediate to advanced builders.\u003c\/li\u003e\n\u003cli\u003eAssembly instructions are not included; use designer reference images for guidance.\u003c\/li\u003e\n\u003cli\u003eSupplied unassembled and unpainted unless otherwise stated.\u003c\/li\u003e\n\u003cli\u003eSanding, trimming, drilling, test-fitting, fabrication, and minor cleanup may be required.\u003c\/li\u003e\n\u003cli\u003eClean resin parts before priming and painting.\u003c\/li\u003e\n\u003cli\u003eHobby tools, adhesives, paint, donor kits, drivetrain parts, wheels, tires, and other accessories are not included unless expressly stated.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eStandard MMW Disclaimer\u003c\/h3\u003e\u003cp\u003eProduct photos may show assembled, painted, or detailed examples for display purposes. Only the components specifically described above are included. Paint, adhesives, decals, donor kits, and other accessories are not included unless expressly stated.\u003c\/p\u003e","brand":"MCS Design","offers":[{"title":"Default Title","offer_id":52384834191660,"sku":"MCSD-PTRF","price":30.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/1232\/0812\/files\/IMG_4612.webp?v=1782302744"},{"product_id":"pro-touring-chassis-kit-for-1957-chevrolet-bel-air-copy","title":"Pro Touring Chassis Kit for 1955 Chevrolet Bel Air","description":"\u003cp\u003eTransform a 1955 Chevrolet Bel Air into a modern restomod, show car, or track-inspired Pro Touring build with this detailed chassis kit from MCS Designs. Engineered for compatible AMT\/ERTL, AMT re-tool, and Revell donor kits, the package combines a three-piece chassis, multiple front and rear clip configurations, complete suspension detail, brakes, exhaust, and a Ford 9-inch rear end.\u003c\/p\u003e\u003ch3\u003eProduct Highlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDesigned for compatible 1955 Chevrolet Bel Air kits\u003c\/li\u003e\n\u003cli\u003eComplete three-piece chassis\u003c\/li\u003e\n\u003cli\u003eHigh- and low-mount rear clip options for different AMT versions\u003c\/li\u003e\n\u003cli\u003eFront clip options with or without A-arms\u003c\/li\u003e\n\u003cli\u003eTwin exhaust system and steering rack\u003c\/li\u003e\n\u003cli\u003eFront sway bar and rear anti-roll bar\u003c\/li\u003e\n\u003cli\u003eFour brake discs and four calipers\u003c\/li\u003e\n\u003cli\u003eAdjustable front and rear coilovers\u003c\/li\u003e\n\u003cli\u003eRear control arms and sheet-metal differential housing\u003c\/li\u003e\n\u003cli\u003eFord 9-inch differential center\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatibility and Fitment\u003c\/h3\u003e\u003cp\u003eDesigned for compatible 1\/24 and 1\/25 scale AMT\/ERTL, AMT re-tool, and Revell 1955 Chevrolet Bel Air donor kits. The donor kit is required and is not included. Select and test-fit the appropriate front and rear clip configuration for the exact kit version before final assembly.\u003c\/p\u003e\u003ch3\u003eWhat’s Included\u003c\/h3\u003e\u003cp\u003eOne unassembled resin Pro Touring chassis kit with three-piece chassis, high- and low-mount rear clip options, front clip options with and without A-arms, twin exhaust, steering rack, sway and anti-roll bars, four brake discs, four calipers, front hubs, four adjustable coilovers, rear control arms, sheet-metal differential housing, brackets, and Ford 9-inch center section.\u003c\/p\u003e\u003ch3\u003eScale\u003c\/h3\u003e\u003cp\u003eDesigned for 1\/24 and 1\/25 scale builds.\u003c\/p\u003e\u003ch3\u003eBuilder Notes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAssembly instructions are not included; use the designer’s reference images for guidance.\u003c\/li\u003e\n\u003cli\u003eSupplied unassembled and unpainted unless otherwise stated.\u003c\/li\u003e\n\u003cli\u003eSanding, trimming, drilling, test-fitting, and minor cleanup may be required.\u003c\/li\u003e\n\u003cli\u003eClean resin parts before priming and painting.\u003c\/li\u003e\n\u003cli\u003eHobby tools, adhesives, paint, donor kit, drivetrain, wheels, tires, and other accessories are not included unless expressly stated.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eStandard MMW Disclaimer\u003c\/h3\u003e\u003cp\u003eProduct photos may show assembled, painted, or detailed examples for display purposes. Only the components specifically described above are included. Paint, adhesives, decals, donor kits, and other accessories are not included unless expressly stated.\u003c\/p\u003e","brand":"MCS Design","offers":[{"title":"Default Title","offer_id":52384836026668,"sku":"MCSD-55BELAIR-PROTOURING","price":40.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/1232\/0812\/files\/logo-maker_20-12-2024_11h55m17s.jpg?v=1782302776"},{"product_id":"pro-touring-street-bagged-chassis","title":"Pro Touring\/Street Bagged Chassis","description":"\u003cp\u003eCreate a detailed low-stance Pro Touring car, bagged street machine, show truck, or modern restomod with the Pro Touring\/Street Bagged Chassis from MCS Design. This modular resin platform combines adjustable three-piece rails with air suspension, steering, drivetrain, fuel, electrical, exhaust, and brake details.\u003c\/p\u003e\u003ch3\u003eProduct Highlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThree-piece rails for wheelbase and length adjustment\u003c\/li\u003e\n\u003cli\u003eFront bagged suspension and steering assembly\u003c\/li\u003e\n\u003cli\u003eRear differential with adjustable brackets and hinges\u003c\/li\u003e\n\u003cli\u003eAdjustable rear upper and lower suspension arms\u003c\/li\u003e\n\u003cli\u003eTwo driveshafts and steering rack\u003c\/li\u003e\n\u003cli\u003eTwo batteries with holders\u003c\/li\u003e\n\u003cli\u003eFuel cell with filler\u003c\/li\u003e\n\u003cli\u003eModular exhaust system\u003c\/li\u003e\n\u003cli\u003eTwo rear air bags, four pumps, and two tanks\u003c\/li\u003e\n\u003cli\u003eNarrow front clip and two front suspension configurations\u003c\/li\u003e\n\u003cli\u003ePro Touring brake discs and calipers\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatibility and Fitment\u003c\/h3\u003e\u003cp\u003eDesigned for custom installation in 1\/24 and 1\/25 scale model cars and trucks. Final fitment depends on the donor body and floor, wheelbase, frame width, drivetrain, wheel and tire package, suspension position, and desired stance.\u003c\/p\u003e\u003ch3\u003eWhat’s Included\u003c\/h3\u003e\u003cp\u003eOne unassembled resin bagged chassis system with adjustable rails, front and rear suspension components, differential, driveshafts, steering rack, batteries and holders, fuel cell, exhaust components, air bags, pumps, tanks, brake components, and the supplied updated front-clip parts.\u003c\/p\u003e\u003ch3\u003eScale\u003c\/h3\u003e\u003cp\u003eDesigned for 1\/24 and 1\/25 scale builds.\u003c\/p\u003e\u003ch3\u003eBuilder Notes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRecommended for intermediate to advanced builders.\u003c\/li\u003e\n\u003cli\u003eUse the designer’s reference images for assembly guidance.\u003c\/li\u003e\n\u003cli\u003eSupplied unassembled and unpainted unless otherwise stated.\u003c\/li\u003e\n\u003cli\u003eSanding, trimming, drilling, test-fitting, fabrication, and minor cleanup may be required.\u003c\/li\u003e\n\u003cli\u003eClean resin parts before priming and painting.\u003c\/li\u003e\n\u003cli\u003eHobby tools, adhesives, paint, donor kits, drivetrain parts, wheels, tires, and other accessories are not included unless expressly stated.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eStandard MMW Disclaimer\u003c\/h3\u003e\u003cp\u003eProduct photos may show assembled, painted, or detailed examples for display purposes. Only the components specifically described above are included. Paint, adhesives, decals, donor kits, and other accessories are not included unless expressly stated.\u003c\/p\u003e","brand":"MCS Design","offers":[{"title":"Default Title","offer_id":52384836387116,"sku":"MCSD-PTSBAG","price":40.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/1232\/0812\/files\/FFAECFB2-129B-4D6C-9F3D-4EF3B01C3E19_f709b96d-a510-42ec-b98c-2ca43f075187.webp?v=1782302799"},{"product_id":"pro-touring-street-bagged-chassis-copy","title":"Pro Touring Muscle Car Chassis","description":"\u003cp\u003eBuild a modern racing-inspired foundation for a Pro Touring, restomod, drift, show-car, or custom truck project with the Pro Touring Muscle Car Chassis from MCS Design. The modular resin platform uses adjustable three-piece rails and pushrod cantilever suspension assemblies to support custom wheelbase and drivetrain layouts.\u003c\/p\u003e\u003ch3\u003eProduct Highlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThree-piece adjustable chassis rails\u003c\/li\u003e\n\u003cli\u003eOne-piece front pushrod cantilever suspension\u003c\/li\u003e\n\u003cli\u003eTwo-piece rear pushrod cantilever suspension\u003c\/li\u003e\n\u003cli\u003eRear cradle accepts a transaxle or traditional differential\u003c\/li\u003e\n\u003cli\u003eRadiused rectangular frame design\u003c\/li\u003e\n\u003cli\u003eSuitable for custom wheelbase adjustment\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatibility and Fitment\u003c\/h3\u003e\u003cp\u003eDesigned for custom integration into 1\/24 and 1\/25 scale model cars and trucks. Final fitment depends on body width, wheelbase, floor and firewall dimensions, engine and transmission choice, suspension position, and selected rear drivetrain configuration.\u003c\/p\u003e\u003ch3\u003eWhat’s Included\u003c\/h3\u003e\u003cp\u003eOne unassembled resin chassis system with three-piece adjustable rails, one-piece front pushrod cantilever suspension, two-piece rear pushrod cantilever suspension, rear cradle, and the supplied chassis components.\u003c\/p\u003e\u003ch3\u003eScale\u003c\/h3\u003e\u003cp\u003eDesigned for 1\/24 and 1\/25 scale builds.\u003c\/p\u003e\u003ch3\u003eBuilder Notes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRecommended for intermediate to advanced builders.\u003c\/li\u003e\n\u003cli\u003eSupplied unassembled and unpainted unless otherwise stated.\u003c\/li\u003e\n\u003cli\u003eSanding, trimming, drilling, test-fitting, fabrication, and minor cleanup may be required.\u003c\/li\u003e\n\u003cli\u003eClean resin parts before priming and painting.\u003c\/li\u003e\n\u003cli\u003eHobby tools, adhesives, paint, donor kits, drivetrain parts, wheels, tires, and other accessories are not included unless expressly stated.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eStandard MMW Disclaimer\u003c\/h3\u003e\u003cp\u003eProduct photos may show assembled, painted, or detailed examples for display purposes. Only the components specifically described above are included. Paint, adhesives, decals, donor kits, and other accessories are not included unless expressly stated.\u003c\/p\u003e","brand":"MCS Design","offers":[{"title":"Default Title","offer_id":52384837009708,"sku":"MCSD-PTMUSCLECHASSIS","price":40.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/1232\/0812\/files\/IMG_1442.webp?v=1782302822"},{"product_id":"single-tank-air-ride-system-w-2-pumps-controller","title":"Single Tank Air Ride System w\/ 2 Pumps \u0026 Controller","description":"\u003cp\u003eAdd realistic air-management detail to a bagged street car, show truck, custom chassis, or low-stance build with the Single Tank Air Ride System from 89DSGN. Each version includes dual compressors, control hardware, and one selected tank size for a complete compact installation.\u003c\/p\u003e\u003ch3\u003eProduct Highlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTwo detailed air compressors\u003c\/li\u003e\n\u003cli\u003eValve box\u003c\/li\u003e\n\u003cli\u003eAir-ride controller\u003c\/li\u003e\n\u003cli\u003eChoice of small, medium, or large air tank\u003c\/li\u003e\n\u003cli\u003eSuitable for cars, trucks, custom chassis, and display builds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eOptions Available\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSmall\u003c\/li\u003e\n\u003cli\u003eMedium\u003c\/li\u003e\n\u003cli\u003eLarge\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatibility and Fitment\u003c\/h3\u003e\u003cp\u003eDesigned for custom installation in 1\/24 and 1\/25 scale model cars and trucks. Final fitment depends on the selected tank size, trunk or bed space, chassis layout, suspension components, and intended plumbing route.\u003c\/p\u003e\u003ch3\u003eWhat’s Included\u003c\/h3\u003e\u003cp\u003eOne unassembled resin air-management set with two compressors, one valve box, one controller, and one air tank in the selected size.\u003c\/p\u003e\u003ch3\u003eScale\u003c\/h3\u003e\u003cp\u003eDesigned for 1\/24 and 1\/25 scale builds.\u003c\/p\u003e\u003ch3\u003eBuilder Notes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEach purchase includes only the selected tank size.\u003c\/li\u003e\n\u003cli\u003eAir lines, fittings, suspension bags, and vehicle components are not included unless expressly stated.\u003c\/li\u003e\n\u003cli\u003eSupplied unassembled and unpainted unless otherwise stated.\u003c\/li\u003e\n\u003cli\u003eSanding, trimming, drilling, test-fitting, and minor cleanup may be required.\u003c\/li\u003e\n\u003cli\u003eClean resin parts before priming and painting.\u003c\/li\u003e\n\u003cli\u003eHobby tools, adhesives, paint, donor kits, and other accessories are not included unless expressly stated.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eStandard MMW Disclaimer\u003c\/h3\u003e\u003cp\u003eProduct photos may show assembled, painted, or detailed examples for display purposes. Only the components specifically described above are included. Paint, adhesives, decals, donor kits, and other accessories are not included unless expressly stated.\u003c\/p\u003e","brand":"89DSGN","offers":[{"title":"Small","offer_id":52624292806956,"sku":"89D-AIR-SINGLE-S","price":10.0,"currency_code":"CAD","in_stock":true},{"title":"Medium","offer_id":52624292839724,"sku":"89D-AIR-SINGLE-M","price":10.0,"currency_code":"CAD","in_stock":true},{"title":"Large","offer_id":52624292872492,"sku":"89D-AIR-SINGLE-L","price":10.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/1232\/0812\/files\/1_14.jpg?v=1770239839"},{"product_id":"bagged-or-coilover-cantilever-suspension-system-1-25-scale","title":"Bagged or Coilover Cantilever Suspension System – 1\/25 Scale","description":"\u003cp\u003eCreate a fully detailed custom rear suspension setup with this large multi-part cantilever suspension system from Nineteen 3D. Designed for pro-touring, custom, restomod, and performance scale-model builds, the system can be assembled as either an air-bagged setup or a coilover-equipped configuration.\u003c\/p\u003e\u003cp\u003eThe kit includes numerous separate and combined components, giving builders flexibility when planning assembly, painting, detailing, and final installation.\u003c\/p\u003e\u003ch3\u003eBuild Options\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAir-bagged cantilever suspension setup\u003c\/li\u003e\n\u003cli\u003eCoilover cantilever suspension setup\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIncluded\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCantilever suspension components\u003c\/li\u003e\n\u003cli\u003eAir-bag components\u003c\/li\u003e\n\u003cli\u003eCoilover components\u003c\/li\u003e\n\u003cli\u003eLinkage and mounting components\u003c\/li\u003e\n\u003cli\u003eMultiple separate parts for easier painting and detailing\u003c\/li\u003e\n\u003cli\u003eSelected combined assemblies for simplified construction\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eScale \u0026amp; Fitment\u003c\/h3\u003e\u003cp\u003eThis listing is supplied in 1\/25 scale and is intended for custom installation rather than a specific donor kit. Chassis modification, fabrication, and careful test-fitting will be required for most applications.\u003c\/p\u003e\u003ch3\u003eBuilder Note\u003c\/h3\u003e\u003cp\u003eThis is a large, highly detailed kit with many individual components. It is best suited to intermediate or experienced builders who are comfortable adapting suspension systems to custom chassis and vehicle projects.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNo paint or decals included. Some sanding, trimming, drilling, fabrication, and test-fitting may be required for best results.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Nineteen 3D","offers":[{"title":"Default Title","offer_id":53442583920940,"sku":"MMW-193D-CANTILEVER-125","price":16.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/1232\/0812\/files\/Cults-page.png?v=1784244101"},{"product_id":"tamiya-r32-gt-r-tubular-front-end-kit-1-24-scale","title":"Tamiya R32 GT-R Tubular Front End Kit – 1\/24 Scale","description":"\u003cp\u003eTransform the Tamiya 1\/24 scale Nissan R32 GT-R into a fully exposed drift, pro-touring, or custom engine-swap build with this highly detailed tubular front-end kit from Nineteen 3D.\u003c\/p\u003e\u003cp\u003eThe system replaces a major portion of the factory front chassis structure with a detailed tube-frame assembly, creating additional room for an RB26, LS-based V8, or other custom engine installation. Choose either a right-hand-drive or left-hand-drive version.\u003c\/p\u003e\u003ch3\u003eIncluded\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTubular front cage\u003c\/li\u003e\n\u003cli\u003eFirewall and support brackets\u003c\/li\u003e\n\u003cli\u003eChassis rails and A-arms\u003c\/li\u003e\n\u003cli\u003eRB26 engine brace\u003c\/li\u003e\n\u003cli\u003eLS3 engine brace\u003c\/li\u003e\n\u003cli\u003eBlank engine brace for custom installations\u003c\/li\u003e\n\u003cli\u003eRadiator\u003c\/li\u003e\n\u003cli\u003eOil cooler\u003c\/li\u003e\n\u003cli\u003eFront and rear suspension components\u003c\/li\u003e\n\u003cli\u003eStandard lowered suspension for the factory-width body\u003c\/li\u003e\n\u003cli\u003eLOW suspension setup intended for BlackBoxSTL's Pandem widebody conversion\u003c\/li\u003e\n\u003cli\u003eBrake rotors and calipers for both sides\u003c\/li\u003e\n\u003cli\u003eBrake booster\u003c\/li\u003e\n\u003cli\u003eClutch master cylinder\u003c\/li\u003e\n\u003cli\u003eWiper motor\u003c\/li\u003e\n\u003cli\u003eGeneric tube-front components for adapting the design to other custom subjects\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDrive-Side Options\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRight-Hand Drive\u003c\/li\u003e\n\u003cli\u003eLeft-Hand Drive\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eScale \u0026amp; Compatibility\u003c\/h3\u003e\u003cp\u003eDesigned primarily for the Tamiya 1\/24 scale Nissan R32 GT-R. The included generic components may also support advanced custom applications, but fitment outside the intended Tamiya kit is not guaranteed.\u003c\/p\u003e\u003cp\u003eThe suspension geometry was developed around 17-inch BlackBoxSTL wheels, and the brakes are designed to work with many BlackBoxSTL wheel designs. Use the LOW suspension components when installing the BlackBoxSTL Pandem widebody conversion.\u003c\/p\u003e\u003ch3\u003eImportant Builder Note\u003c\/h3\u003e\u003cp\u003eThis is an advanced conversion requiring major modification to both the chassis and body. Removing the original structure will leave the model fragile until the tubular cage is securely installed. Careful planning, cutting, alignment, reinforcement, and repeated test-fitting are essential.\u003c\/p\u003e\u003cp\u003eThis kit is an excellent foundation for a large V8, RB26, drift-car, or custom engine-swap build, but it is intended for experienced builders comfortable with extensive fabrication.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNo paint or decals included. Some sanding, trimming, cutting, drilling, fabrication, and test-fitting will be required for best results.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Nineteen 3D","offers":[{"title":"Right-Hand Drive","offer_id":53442597290284,"sku":"MMW-193D-R32TUBE-RHD-124","price":20.0,"currency_code":"CAD","in_stock":true},{"title":"Left-Hand Drive","offer_id":53442597323052,"sku":"MMW-193D-R32TUBE-LHD-124","price":20.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/1232\/0812\/files\/Cults-page_1.png?v=1784247183"},{"product_id":"big-turbo-setup-upgrade-for-tamiya-r32-gt-r-tubular-front-end-1-24-scale","title":"Big-Turbo Setup Upgrade for Tamiya R32 GT-R Tubular Front End – 1\/24 Scale","description":"\u003cp\u003eTurn the Nineteen 3D Tamiya R32 GT-R tubular front-end conversion into a serious big-single-turbo build with this dedicated exhaust, intercooler, and piping upgrade.\u003c\/p\u003e\u003cp\u003eThis upgrade is designed specifically for the \u003ca href=\"https:\/\/www.modelmakersworkshop.com\/products\/tamiya-r32-gt-r-tubular-front-end-kit-1-24-scale\"\u003eTamiya R32 GT-R Tubular Front End Kit – 1\/24 Scale\u003c\/a\u003e and provides the key plumbing and exhaust components needed to build a detailed high-horsepower RB26-style engine bay.\u003c\/p\u003e\u003ch3\u003eIncluded\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBig-single-turbo exhaust manifold\u003c\/li\u003e\n\u003cli\u003eTurbo downpipe\u003c\/li\u003e\n\u003cli\u003eFront-mounted intercooler\u003c\/li\u003e\n\u003cli\u003eIntercooler piping\u003c\/li\u003e\n\u003cli\u003eAssociated connection and installation components\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eRequired Parts — Not Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eNineteen 3D Tamiya R32 GT-R Tubular Front End Kit\u003c\/li\u003e\n\u003cli\u003eTurbocharger\u003c\/li\u003e\n\u003cli\u003eIntake manifold\u003c\/li\u003e\n\u003cli\u003eDonor engine and model kit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatibility\u003c\/h3\u003e\u003cp\u003eDesigned around the Generic Two-Piece Turbo from Slowlys Models and the Greddy-style intake from Scale JDM Resin. These companion parts are not included and may require separate purchase.\u003c\/p\u003e\u003ch3\u003eImportant Builder Note\u003c\/h3\u003e\u003cp\u003eThis is an advanced conversion upgrade intended for experienced builders. It requires careful alignment, modification, fabrication, and repeated test-fitting with the front cage, engine, turbo, intake, chassis, and body. It is not recommended for beginners.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNo front cage, turbocharger, intake manifold, engine, paint, or decals are included. Some sanding, trimming, cutting, drilling, fabrication, and test-fitting will be required for best results.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Nineteen 3D","offers":[{"title":"Default Title","offer_id":53442603647276,"sku":"MMW-193D-R32BIGTURBO-124","price":14.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/1232\/0812\/files\/Cults-page_2.png?v=1784247139"},{"product_id":"6-6-adjustable-bagged-truck-chassis-1-25-scale","title":"6×6 Adjustable Bagged Truck Chassis – 1\/25 Scale","description":"\u003cp\u003eCreate a fully customized six-wheel truck or SUV build with this large, highly detailed adjustable 6×6 bagged chassis system from Nineteen 3D. Designed as a complete custom foundation, the kit includes more than 40 components covering the chassis, suspension, driveline, air-ride equipment, engine bay, fuel system, exhaust, and supporting details.\u003c\/p\u003e\u003cp\u003eThe adjustable layout makes this chassis suitable for adapting to a wide range of 1\/25 scale truck and SUV bodies, allowing experienced builders to develop custom crew-cab, extended-body, hauler, luxury, or performance-inspired 6×6 projects.\u003c\/p\u003e\u003ch3\u003eIncluded\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAdjustable 6×6 chassis structure\u003c\/li\u003e\n\u003cli\u003eFront and rear bagged suspension components\u003c\/li\u003e\n\u003cli\u003eComplete air-ride system components\u003c\/li\u003e\n\u003cli\u003eDifferentials\u003c\/li\u003e\n\u003cli\u003eDriveshafts and driveline components\u003c\/li\u003e\n\u003cli\u003eExhaust-system components\u003c\/li\u003e\n\u003cli\u003eBatteries\u003c\/li\u003e\n\u003cli\u003eFuel tank\u003c\/li\u003e\n\u003cli\u003eRadiator\u003c\/li\u003e\n\u003cli\u003eEngine-bay components\u003c\/li\u003e\n\u003cli\u003eMounting and supporting chassis details\u003c\/li\u003e\n\u003cli\u003eMore than 40 individual components\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eScale \u0026amp; Compatibility\u003c\/h3\u003e\u003cp\u003eDesigned in 1\/25 scale for custom installation under a variety of truck and SUV model kits. The chassis is intended for use with tyres approximately 28–29 mm in diameter, or about 1.10 inches.\u003c\/p\u003e\u003cp\u003eNo specific donor kit is guaranteed. Wheelbase adjustment, body-floor modification, mounting fabrication, drivetrain alignment, and suspension setup will be required for most builds.\u003c\/p\u003e\u003ch3\u003eImportant Builder Note\u003c\/h3\u003e\u003cp\u003eThis is an advanced, high-part-count conversion intended for experienced builders. Careful planning, measuring, cutting, alignment, reinforcement, fabrication, and repeated test-fitting are essential. It is not recommended for beginners.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBody, cab, bed, engine, wheels, tyres, paint, and decals are not included. Some sanding, trimming, cutting, drilling, fabrication, and test-fitting will be required for best results.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Nineteen 3D","offers":[{"title":"Default Title","offer_id":53442610725164,"sku":"MMW-193D-6X6CHASSIS-125","price":35.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/1232\/0812\/files\/Cults-6x6-FULL.png?v=1784245047"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/1232\/0812\/collections\/Chassis_Collection.png?v=1782265456","url":"https:\/\/www.modelmakersworkshop.com\/collections\/chassis-systems.oembed","provider":"Model Maker's Workshop","version":"1.0","type":"link"}